Card 9 - TOTTEMP Total Temperature Effects Definition

This optional card specifies the parameters and options for defining total temperature effects on fluid duct elements.

Parameters: KODE, N1, T1, T2, T3, T4

KODE

KODE is the code TOTTEMP (or 93)

N1

N1 is the TOTTEMP card ID. Cards with the same ID reference the same Total Temperature Effects definition.

T1 = ROT_FX

T1 = ROT_FX (or 2) specifies that the fluid duct temperatures are corrected for rotational effects. The ID of the referenced ROT_FX cards is specified in T2.

This card is required for one-sided total temperature effects.

T1 = ROT_FXA or ROT_FXB

T1 = ROT_FXA or ROT_FXB is similar to ROT_FX.

ROT_FXA and ROT_FXB reference the rotational effects for the first and second side of the two-sided total temperature effects, respectively.

T1 = ROT_FXAB

T1 = ROT_FXAB specifies that the fluid duct temperatures are corrected for rotational effects. The ID of the referenced ROT_FX cards is specified in T2. This card is defined for two-sided total temperature effects with the same rotational effects for both sides.

T1 = SELECTION

T1 = SELECTION specifies that total temperature effects are applied to a selection of elements.

  • T2 is a group name or element number of the fluid duct element(s).
  • T3 is an optional group name that you specify for the convecting wall elements. For two-sided total temperature effects, it represents the group name of the convecting wall elements of the first side.
  • For two-sided total temperature effects, T4 is an optional group name that you specify for the convecting wall elements of the second side.
  • When T3 and T4 are not specified, the thermal solver searches for the duct connections to the wall and creates the selection from wall elements. The rotational effects are the same for both sides and are specified in the ROT_FXAB card.