Home
User documentation
Assumptions and limitations for exporting a model
The following section describes the Thermal Model Exchanger assumptions and limitations when you export a Thermal Desktop model to a Simcenter 3D Space Systems Thermal XML file.
Exporting heat loads
Thermal Model Exchanger supports the Total Load and Flux types of Thermal Desktop Heat Load. It converts these entities into the Heat Load and Heat Flux types of Simcenter 3D Space Systems Thermal Thermal Loads respectively.

User documentation
- Introduction
  Thermal Model Exchanger is a Windows application that allows you to transfer thermal models between Ansys Thermal Desktop^TM and Simcenter 3D Space Systems Thermal. The application supports the transfer of meshes, material and optical properties, and boundary conditions of your model.
- Thermal Model Exchanger user interface
  The Thermal Model Exchanger user interface consists of a top border bar and an information window.
- How to use Thermal Model Exchanger
  The following section describes how to use Thermal Model Exchanger to transfer thermal models between Thermal Desktop and Simcenter 3D Space Systems Thermal.
- Simcenter 3D entities supported by Thermal Model Exchanger
  This page summarizes the Simcenter 3D Space Systems Thermal entities supported by the Thermal Model Exchanger during the import.
- Thermal Desktop entities supported by Thermal Model Exchanger
  This page summarizes the Thermal Desktop entities supported by the Thermal Model Exchanger during the export.
- Assumptions and limitations for importing a model
  The following section describes the Thermal Model Exchanger assumptions and limitations when you import a Simcenter 3D Space Systems Thermal model into Thermal Desktop.
- Assumptions and limitations for exporting a model
  The following section describes the Thermal Model Exchanger assumptions and limitations when you export a Thermal Desktop model to a Simcenter 3D Space Systems Thermal XML file.
  - Exporting meshes
    You can use Thermal Model Exchanger to export meshes from Thermal Desktop into Simcenter 3D Space Systems Thermal.
  - Exporting primitives
    You can use Thermal Model Exchanger to export primitives from Thermal Desktop into Simcenter 3D Space Systems Thermal.
  - Exporting domain tag sets
    You can use Thermal Model Exchanger to export Domain Tag Sets from Thermal Desktop into Simcenter 3D Space Systems Thermal as Groups.
  - Exporting symbols
    You can use Thermal Model Exchanger to export symbol values from Thermal Desktop into Simcenter 3D Space Systems Thermal.
  - Exporting thermo-physical properties
    You can use Thermal Model Exchanger to export thermo-physical properties from Thermal Desktop into Simcenter 3D Space Systems Thermal.
  - Exporting heat loads
    Thermal Model Exchanger supports the Total Load and Flux types of Thermal Desktop Heat Load. It converts these entities into the Heat Load and Heat Flux types of Simcenter 3D Space Systems Thermal Thermal Loads respectively.
  - Exporting heaters
    You can use Thermal Model Exchanger to export Heaters from Thermal Desktop to Simcenter 3D Space Systems Thermal.
  - Exporting boundary nodes
    You can use Thermal Model Exchanger to export boundary nodes from Thermal Desktop into Simcenter 3D Space Systems Thermal.
  - Exporting contactors
    Thermal Model Exchanger exports Thermal Desktop Contactors as a Thermal Coupling type of Thermal Coupling simulation objects in Simcenter 3D Space Systems Thermal.
  - Exporting radiation
    You can use the Thermal Model Exchanger to export radiation from Thermal Desktop to Simcenter 3D. The surface selection varies depending on the settings in Thermal Desktop.
  - Exporting orbits and space environment
    You can use Thermal Model Exchanger to export External Heating Environment boundary conditions from Thermal Desktop into Simcenter 3D Space Systems Thermal.
  - Exporting a case set
    You can use Thermal Model Exchanger to export case sets from Thermal Desktop into Simcenter 3D Space Systems Thermal.
- Legal notice

Exporting heat loads

Thermal Model Exchanger supports the Total Load and Flux types of Thermal Desktop Heat Load. It converts these entities into the Heat Load and Heat Flux types of Simcenter 3D Space Systems Thermal Thermal Loads respectively.

Thermal Model Exchanger (TMX) supports exporting constant, time-dependent, and temperature-dependent values and tables for thermal loads. You can also specify multipliers for the supported table types as either a constant value or a symbol. The combination of time and temperature-dependent values and tables are not supported. For those tables, TMX exports the first value of the table defined in Thermal Desktop and displays a warning in the export summary.

TMX supports Thermal Desktop Heat Load that are applied on 3D solid primitives, faces of a solid primitive, surface primitives, edges of a surface primitive, surfaces, edges, 2D elements, and element edges. Note that Thermal Desktop does not allow Heat Load applied on a mix of entities.

The following table lists the Simcenter 3D and corresponding Thermal Desktop Heat Load entities.


Heat Load location	Selected Entities in Thermal Desktop	Selected Entities in Simcenter 3D
Solid	3D solid primitive	3D elements
Surface	Face(s) of a 3D solid primitive	3D element faces
	2D primitive	2D elements
	2D elements from a regular mesh	2D elements
Edge	Edge(s) of a surface primitive	2D element edges
Edge	Edge(s) of regular 2D elements	2D element edges

TMX does not support the Put heat load into Insulation nodes option of the Thermal Desktop Heat Load, and ignores it during the export process.