2000 - 2999 information messages
| ID | Message text and information |
|---|---|
| 2100 | ================================== Articulation Time Step: <integer> ================================== |
| 2200 | Obtaining license for <type> module |
| 2201 | This installation will expire in <number> days. Contact your account representative. |
| 2202 | Allocating <integer> memory locations for array <integer> of type <type>. <integer> bytes already allocated |
| 2701 | Nodes <ID> thru <ID> have been generated |
| 2702 | Element <ID> created as reverse side of element <ID>, no merging will occur |
| 2703 | Elements relabeled <integer>-><integer> <integer>-><integer> <integer>-><integer> <integer>-><integer> |
| 2704 | Nodes relabeled <integer>-><integer> <integer>-><integer> <integer>-><integer> <integer>-><integer> |
| 2705 | Local time at perigee is: <value> |
| 2706 | Element <ID> is flagpole or hinge connected to element <ID>, Element <ID> was created at their juncture and merged to element <integer> |
| 2707 | Element <ID> is flagpole/hinge door connected to element <ID>, Elements <ID> <ID> at their juncture were merged. |
| 2708 | No. of back-to-back elements converted to reverse side elements is <integer>. The reverse side elements were assigned zero thickness. For further details please look on file [Solution_name]_report.log. |
| 2709 | Number of flagpole or hinge-door connected elements corrected is <integer>. For further details please see file [Solution_name]_report.log. |
| 2710 | Elements of group <name> were not deactivated |
| 2711 | Elements of group <name> were deactivated |
| 2712 | Diurnal heating request <integer> |
| 2713 | This diurnal heating period is during the daytime |
| 2714 | Sun and planet angles are calculated for <integer> diurnal heating positions. Sun and planet angles are calculated for <integer> diurnal heating positions. |
| 2715 | Night starts at time= <value> Night ends at time= <value> Night starts at time= <value> Night ends at time= <value> |
| 2716 | Night duration = <value> Night duration = <value> |
| 2716 | Night duration = <value> Night duration = <value> |
| 2717 | Incident direct flux at time <value> is <value> Incident direct flux at time <value> is <value> |
| 2718 | The following calculation points occur during the night: The following calculation points occur during the night: |
| 2719 | At time = <value> At time = <value> |
| 2720 | Group name association with a long group name NameLong group name |
| 2721 | <name> <type> |
| 2722 | <type> |
| 2723 | Incident direct flux <type> <type> |
| 2724 | A Fortran user-written subroutine has been detected. The Analyzer module will pass the T, TIME, and DT variables to the subroutine in single precision. To have these variables passed with double precision, please include the line DOUBLE PRECISION T(*),TIME,DT among your specification statements. |
| 2725 | A Fortran user-written subroutine has been detected. The Analyzer module will pass the T, TIME, and DT variables to the subroutine in double precision. |
| 2726 | A Lahey Fortran user-written subroutine has been detected. The Analyzer module will pass the T, TIME, and DT variables to the subroutine in single precision. |
| 2727 | Note: Elements with physical property <integer> have been defined to be non-homogeneous multilayer elements. However, not all of these elements have the same material properties, in particular elements <integer> and <integer> have material properties <integer> and <integer> respectively. This is not a problem, just information. |
| 2728 | Note: AMBIENT <integer> element with zero total and static pressure boundary conditions created at node <integer> |
| 2729 | Diurnal Heating Request Calculations |
| 2730 | Some axisymmetric element(s) had their surface normal reversed in order to follow the convention that if a 2-noded axisymmetric element is surface coated on an axisymmetric solid, its front side must point out of the solid. Should you wish it to radiate into the solid, please define the reverse side accordingly. A complete element list appears in file groups.unv with groups names starting with: <name> |
| 2731 | _#I DATACH 1 <string> |
| 2732 | Note: In solution step input for step <name> <value> is greater than the time interval between this step and the previous one. The interval will be used as <value>. |
| 2733 | Note: In solution step input for step <name> the minimum timestep is greater than the maximum timestep. The maximum timestep will be used as the minimum timestep. |
| 2734 | Note: Stream <integer> with the name <string> is defined on unsupported topology including multiple not connected surfaces. |
| 2735 | For a complete list of solution steps modifications, please see the verbose log file <type> |