Home
Thermal Solver
Contains thermal solver related guides, such as the TMG reference manual, thermal API guide, and error message list.
Thermal solver theory
Describes the theory and methods of the thermal solver.
Conduction methods
To model heat conduction, the thermal solver can use two finite volume methods, center of element method or element's center of gravity method, or the finite element method.
Finite volume methods
Element's center of gravity method
The element's center of gravity (CG) method creates conductances between the CG of the element and its boundary elements.
Interface conductances

Thermal Solver
Contains thermal solver related guides, such as the TMG reference manual, thermal API guide, and error message list.
- Thermal solver guides
  Maya HTT's thermal solver is included in Simcenter 3D and in Simcenter Femap. This page contains links to thermal solver guides, which help you understand how the thermal solver works.
- Thermal solver reference
  Describes the format and contents of the thermal solver's input and output files
- Thermal solver theory
  Describes the theory and methods of the thermal solver.
  - Introduction
    This guide provides the theory and methods used by the thermal solver, including methods to calculate conduction, convection, and radiation, as well as modeling specific topics using the thermal solver.
  - Elements in the thermal solver
    The thermal solver uses elements to calculate conductive, convective, and radiative conductances, as well as hydraulic resistances.
  - Supported element types for radiation
    Radiating elements may be defined with 1 to 4 corner nodes. The elements may be linear or parabolic.
  - Conduction methods
    To model heat conduction, the thermal solver can use two finite volume methods, center of element method or element's center of gravity method, or the finite element method.
    - Finite volume methods
      - Comparison between finite volume methods
        The thermal solver supports two finite volume conduction methods—the center of element method and the element's center of gravity (CG) method—to create conductive conductances from geometry.
      - Element's center of gravity method
        The element's center of gravity (CG) method creates conductances between the CG of the element and its boundary elements.
        Conductance matrix for beams
        Conductance matrix for triangles
        Conductance matrix for tetrahedra
        Conductance matrix for quadrilateral elements
        Conductance matrix for wedge and hexahedron elements
        Conductance matrix for pyramid elements
        Interface conductances
      - Center of element method
        The following table lists element types supported by the center of element conduction method and how the thermal solver identifies their center of location and sub-elements to create conductances between elements.
      - Axisymmetric elements
        This topic describes how axisymmetric shell and solid elements are defined in thermal analysis.
      - Orthotropic materials
        This topic explains how orthotropic materials are handled in thermal analysis, detailing the process for stretching shell and solid elements based on their thermal conductivities in different material directions and the subsequent calculation of conductance.
    - Finite element method
      The finite element method computes the temperature values at discrete points, solid nodes, by solving the heat conduction equation.
  - Convective heat transfer methods
    The thermal solver computes convection conductances for various geometrical configurations using correlations that depend on specified characteristic lengths, convective surfaces, and type of convection.
  - Radiation exchange methods
    Thermal radiation is a heat transfer due to electromagnetic radiation emitted by the surface of bodies due to their temperature.
  - Steady state analysis
    In a steady state analysis, the thermal solver solves the temperatures of non-sink elements iteratively using the following algorithm.
  - Transient analysis
    Transient analysis is performed using the following algorithm.
  - Hydraulic network analysis
    When the hydraulic pressure-flow network is present in the model, the thermal solver solves it at each iteration or time step using the following algorithm.
  - Miscellaneous topics
  - Thermal solver theory bibliography
    The following bibliography lists all sources used to explain how the thermal solver works.
- Thermal solver API
  Allows you to create or add functionality to enhance the thermal solver capabilities.
- Thermal solver error message list
  Lists solver messages that the thermal solver generates to communicate issues with the model or the solve.

Interface conductances

When an interface conductance between two adjacent elements is specified, two parallel boundary elements are created on the adjacent elements, by splitting the nodes of the interface element. When more than two elements are connected to the interface element, conductances are computed between all the elements.

The interface conductance equal to the area of the boundary element times the interface conductance is then created connecting the two boundary elements.

If more than two elements are connected to the interface element, then conductances will be created between all the elements with a value equal to the total interface conductance value divided by the total number of elements.