Home
User help
Updating the simulation model
After you verified the optimization results, you must update the simulation model to reflect any changes that were made during the thermal correlation analysis so that you can continue your modeling in Simcenter 3D.
Update the correlated solution
The following procedure shows how to update and save a new simulation model that has the optimized design variable values applied to the related quantities.

Getting started
What's new
User help
- Introduction to TMG Correlation
- TMG Correlation workflow
- TMG Correlation interface
  The TMG Correlation user interface is integrated in Simcenter 3D using NX Designcenter Open and contains unique features to conduct a thermal correlation analysis, in addition to standard tools and commands described in the Simcenter 3D Online help and the NX Designcenter Online help.
- Thermal correlation analysis preparation
  Before conducting a thermal correlation analysis, it is important to properly prepare your simulation model and the reference data.
- Understanding thermal correlation analysis
  The thermal correlation is a calibration process that helps you find the best thermal solution that minimizes the error between the computed and target temperatures at different locations and times.
- Managing the reference data
  In TMG Correlation, reference data refers to the temperature and time data that come from experimental tests or from prior and validated simulation models. They are named sensors and are used as targets for the optimization of the correlated solution.
- Understanding design variables
  A design variable is a simulation quantity of your model that the TMG Correlation solver varies within a specific range during the optimization to reduce the gap between the reference data and the simulation results.
- Setting up the optimization
  In optimization, the goal is to find values for the design variables that minimize the difference between the reference data and the correlated solution results.
- Monitoring the optimization
  Use the Solution Monitor and Solution Control Monitor to track the analysis during the solve. The monitors provide solver-specific information for the TMG thermal solver and the thermal correlation analysis.
- Analyzing the optimization results
  After you solve a thermal correlation analysis, you can analyze the results of the optimization process in the TMG Correlation dialog box.
- Updating the simulation model
  After you verified the optimization results, you must update the simulation model to reflect any changes that were made during the thermal correlation analysis so that you can continue your modeling in Simcenter 3D.
  - Update the correlated solution
    The following procedure shows how to update and save a new simulation model that has the optimized design variable values applied to the related quantities.
  - Model Update page
    The Model Update page lets you update the simulation model, which is saved to a new location, with the optimization results when you select the Model Update node in the main panel.
- Theory
  The TMG Correlation solver uses different optimization aglorithms to solve the objective function based on the governing equation; all described in this section.
- Reference manuals
  This page contains links to thermal solver manuals that explain how the solver operates and how to use its various features.
- Contacting Maya HTT
- Legal notice
- License agreement
Installation guide
Tutorials
Knowledge base
Previous releases

Update the correlated solution

The following procedure shows how to update and save a new simulation model that has the optimized design variable values applied to the related quantities.

Loaded results from a solved thermal correlation analysis.

In the TMG Correlation dialog box, select the Optimization > Model Update node.
The software automatically selects the Simulation and FEM or Assembly FEM files for the model update in the Copy Files table indicated by the active or lock icons. You cannot deselect the Simulation file.
(Optional) To copy the part or idealized part files, in native Simcenter 3D, in the Copy Files table, double-click the status of the appropriate file.
The status changes from inactive to active .
In Teamcenter Integration, you cannot make copies of part files.
The Destination Folder provides a location different from the source folder, to which the software copies the updated model files.
In the native Simcenter 3D, click Browse to select a folder. In Teamcenter Integration, specify a Teamcenter repository path.
Click OK to export the updated model files.
The original files are not overwritten. The updated files are created in a new folder. The new Simulation file contains the updated simulation objects, expressions, and calibrated solution.
The new FEM contains new materials with updated material properties if they are optimized. In native Simcenter 3D, the new files have the same name as the original files except the updated files whose filenames are prepended with 'correlated_'.

In Simcenter 3D, both the original and the correlated Simulation files are open in two separate tabbed windows. The displayed part is the original Simulation file. To start working on the updated model, change the tabbed window to make the new Simulation file active.