Home
Tutorials
Performing a thermal correlation analysis on a transient problem
In this tutorial, you will learn how to set up and solve a thermal correlation analysis, analyze the results, and update the model with the optimized results for a transient problem.
5. Pair the sensors with the simulation model.
You will pair the sensors with the elements of the simulation model using the proximity method.

Getting started
What's new
User help
Installation guide
Tutorials
- TMG Correlation tutorials
  These examples are designed to help you become familiar with some of the major features available in TMG Correlation.
- Performing a thermal correlation analysis on a steady state problem
  In this tutorial, you will learn how to set up and solve a thermal correlation analysis, analyze the results, and update the model with the optimized results for a steady-state problem.
- Performing a thermal correlation analysis on a transient problem
  In this tutorial, you will learn how to set up and solve a thermal correlation analysis, analyze the results, and update the model with the optimized results for a transient problem.
  - 1. Open the Simulation file.
    In addition to opening the file used for this tutorial, you will reset the dialog boxes to ensure that they are in the expected initial state.
  - 2. Examine the model.
    Use the Simulation Navigator to explore the model.
  - 3. Create a thermal correlation analysis.
    You will create a thermal correlation analysis in Simcenter 3D using TMG Correlation.
  - 4. Define the sensors.
    You will create four sensors by importing reference data from a CSV file and by using existing points created previously in the original model.
  - 5. Pair the sensors with the simulation model.
    You will pair the sensors with the elements of the simulation model using the proximity method.
  - 6. Inspect the difference between the reference data and the original solution.
    You will compare the reference temperatures and the original solution temperatures to see the temperature difference between your model and the satellite test data while running the thermal correlation analysis.
  - 7. Create the design variables.
    You will use the multiplier and substitution methods to create design variables from the boundary condition parameters that are present in the correlated solution.
  - 8. Set up the targets.
    You will set the weight factor of the bus targets for the optimization process.
  - 9. Define the optimization design variables.
    You will specify the minimum, and maximum values of the four design variables you previously created to limit their variation during the optimization process.
  - 10. Set up the solver settings.
    You will define the TMG Correlation solver parameters for the optimization.
  - 11. Solve the thermal correlation analysis.
    You will launch the optimization of the active thermal correlation analysis.
  - 12. Plot the thermal correlation graph during the optimization process.
    The Solution Monitor dialog box is still open from the previous step. During the solve, you will plot the evolution of the objective function and the evolution of the design variables gradient.
  - 13. Analyze the optimized solution results.
    You will load and analyze the optimized solution results after solving the thermal correlation analysis.
  - 14. Plot the optimization results.
    You will compare the reference, original, and optimized temperature values for four targets after solving a thermal correlation analysis on the same plot.
  - 15. Update the simulation model.
    You will update and save the new simulation model that contains the optimized design variable values applied to the related parameters.
- Correlation analysis of a turbomachinery compressor model
  This is an instruction-based tutorial. Instead of following a step-by-step procedure, you are given a scenario and problem statement to solve. Complete the activities below to achieve the objective.
Knowledge base
Previous releases

5. Pair the sensors with the simulation model.

You will pair the sensors with the elements of the simulation model using the proximity method.

In the TMG Correlation dialog box, select the Reference Data > Pairing node.
In the Pairing group, in the Pairing table, select sensor_antenna then press and hold Shift; and select the last sensor in the list to select all the sensors form the Pairing table.
In the Pairing Method group, from the Pairing Method list, select Proximity to pair the sensor to the closest elements.
Click Pair.
The software updates the Pairing table with the pairing information for each selected sensor, such as the element ID from the original solution model, the distance between the sensors and the element, and the method used to pair the element.